Garant Optima Co., Ltd
Details determine success or failure, professionally promote sales
Add to Cart
Datavideo MCU-100S and ITC-100 over fiber for Sony studio fiber system (JM-EFP-S17) consists of camera fiber optic adapter (TX) and fiber optic base station (RX) , custom-designed for Sony long-distance transmission of Sony live production system, to transmit a 3G/HD-SDI signal from the camera side to the Base Station, remote control(Datavideo MCU-100S or MCU-200S), Intercom(Datavideo ITC-100), Tally(connect to ITC-100), The system puts all of the signals needed for multi-camera 3G/HD-SDI production onto 2xSM fiber with LC interface.
Power supply:
This product is the battery power supply, the camera fiber optic adapter (TX) hanging on the camcorder via the front A shaped gusset plate , the back hanging battery while power supply to the camera and fiber optic adapter.
Sony studio fiber system with Datavideo MCU-100S& ITC-100(JM-EFP-17S) Features:
Easily pass the Pathological test(extremely harsh environments)
SD, HD, 3G automatic input detection, support 270Mbit / s - 1.48Gbit / s - 3Gbit / s rate, support SMPTE-424M 3Gbps HD-SDI, SMPTE-292M HD-SDI, SMPTE-259M SDI serial digital video signals and DVB-ASI signals
Uncompressed lossless transmission without delay;
More than 10KM transmission distance up to a maximum 80KM; when the opto-electric hybrid cable power supply the distance up to 250 meters.
Aluminum precision manufacturing, the size is about the BP battery size, lightweight and convenient, A-type with a flexible pinch;
Supports Datavideo MCU-100S or MCU-200S
Mic level input (with mute function) and amp functions (volume adjustment)
Tally output +12V or dry Contact Closure optional
Wide temperature range, low power consumption
A-mount battery optional
Television studio, mobile studio
EFP Electronic Field Production, major sporting events and large celebrations broadcast live
ENG camera (outdoor photo camcorders) upgraded to a EFP camera.
Remote OB Van/Truck Video Feeds
Broadcast Studio Camera Feeds
SD Routing (Requires Optical Matrix Switch)
Long-Haul Signal Transport
Lecture Hall Projector Connectivity
Medical / Surgical Room Broadcast
Specifications:
General index
| Work Temp | -25°C to 55°C |
| Storage Temp | -40°C to 85°C |
| humidity | 0 ~ 95% (non-condensing) |
| Camera Optic Adaptor | |
| Input power | DC 12~19V |
| Power consumption | <10W |
| Net weight | 1kg |
| Appearance size | A-Type the size is 160mm*100mm*44mm |
Camera optic adaptor image as below:
| Optic Base Station | |
| Input power | AC90~240V |
| Power consumption | <10W |
| Net weight | 3kg |
| Appearance size | 19” 1U standard rack mount |
Optical:
| Wavelength | 1310nm / 1550nm / CWDM |
| Output Power | -6~-1dBm |
| Rx sensitivity | <-18dBm |
| Transmission Distance | SM fiber 10+km , MM fiber 300m |
| Optical connector | Dul LC (optional) |
SDI input/output:
| Signal format | SMPTE 424M, SMPTE 292M, SMPTE 259M |
| Data rate | 270Mbit/s - 1.48Gbit/s - 3Gbit/s |
| Cable Equalization | Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s |
| SDI interface | BNC 75 Ohm |
| SDI Channel | 1CH (camera side to base side) |
Intercom:
| Camera Optic Adaptor | |
| Interface | 3.5mm connector |
| Microphone | Mic inputs with mute and pre-amps |
| Headphone | with volume up or down |
| Optic Base Station | |
| Interface | 5Pin XLR connector Male |
| Audio | Bidi Line level audio connected to Datavideo ITC-100 |
Tally:
| Camera Optic Adaptor | |
| Interface | 3.5mm connector |
| Output | Dry Contact Closure |
| On: short or +12V Off: open or 0V | |
| Optic Base Station | |
| Interface | 5Pin XLR connector(Male) |
| Input | Dry Contact Closure |
| On: short to GND or TTL low Off: open or TTL high | |
Remote:
| Camera Optic Adaptor | |
| Interface | RJ45 |
| Data | Support Datavideo MCU-100S or MCU-200S |
| Optic Base Station | |
| Interface | RJ45 |
| Data | Connected to Datavideo MCU-100S or MCU-200S |
| Product Name | Sony EFP/ENG camera fiber system with Datavideo MCU-100& ITC-100(JM-EFP-S17) |
| Product Model | JM-EFP-S17 |
| SDI Connector | BNC |
| Optical Fiber | Dual LC fibers,Compatible with multimode or single mode fiber |
| Power Supply | AC85-260V/50Hz /DC 12V |
| SDI Format | 1)All inputs and outputs are equalized and re-clocked |
| 2)Immune to pathological patterns over the entire link budget and operating temperature range | |
| 3)SMPTE 424M-2006, 292, 259 and DVB-ASI compliant | |
| 4)Supports embedded audio and data signals | |
| 5)Support SDSDI & HDSDI & 3GSDI, Support 270M & 1.485G & 2.97G SDI Video | |
| Dimension | TX: A-Lock on camera end, RX: 19" 1U rack mount on base end |
| Working Environment | Working Temperature: 0 ℃~+85 ℃; Relative Humidity: 0 ~ 95% (no cold condensation) |
| Warranty | 2 Years warranty |
| Product description | Compliance: 3G, HD, SD compliance, SMPTE 424M, SMPTE 292M, SMPTE 259M |
| 1 x 3G-HDSDI, forward direction (from tx) | |
| 1x intercom( microphone audio and headphone in from TX,line level audio out,support Datavideo ITC-100), | |
| 1xRemote control(Datavideo MCU-100S or MCU-200S) | |
| 1 x Tally (dry contact closure,connect to Datavideo ITC-100) | |
| Rx Dimension: 480 x 250 x 50 (mm) = 19' standard case | |
| Grosse weight is about 6.5kg, | |
| Extends distance: Single mode 10km / Multi mode 300 meters | |
| Packing in box: Transmitter x1, Receiver x 1, Power wire x 1, Use mannual x 1 |
| Transmitter ( Camera fiber adaptor ) | Receiver ( Base end ) |
| Shape: A-lock | Shape: 1U Rack mount |
| Video: 1x 3G-HDSDI input, 1x 3G-HDSDI Loopout, BNC connector | Video: 2x 3G-HDSDI output, BNC connector |
| Intercom: 1x 3.5mm connector,Mic inputs with mute and pre-amps,headphone with volume up or down | Intercom: 1x5Pin XLR connector, Male,line level audio,support Datavideo ITC-100 |
| Tally: 1x 3.5mm Connector,Dry contact closure, | Tally:1x5Pin XLR Male Connector connect to Datavideo ITC-100, Dry contact closure, |
| Remote: RJ45 connector,Support Datavideo MCU-100S or MCU-200S | Remote: RJ45 connector,Connect to Datavideo MCU-100S or MCU-200S |
| Vol Control: Mute, Vol+, Vol-, | |
| Fiber : 2xLC | Fiber : 2xLC |
| Power supply: DC12V input | Power supply for base end: 1x AC 90-240V, |
| LED indicator: SDI in, SDI loopout, PWR,Mic,Fiber | LED indicator:SDI out,Fiber,PWR |
Panel diagram: