Garant Optima Co., Ltd
Details determine success or failure, professionally promote sales
Add to Cart
4Port USB3.0 fiber extension hub,also named as 1 TO 4 USB3.0 fiber optic extender, which through a two-core or one core fiber to transmit more than 5Gb/s USB3.0 high-speed signal to 250 meters, USB3.0 fiber extension hub uses a dedicated USB3.0 PHY to meet the USB3.0 protocol requirements,and the SFP + photoelectric conversion to reach USB3.0 SuperSpeed signal stable transmission. This equipment consist of two parts-the host side (receiver Rx) and the device side (transmitter Tx). The host side uses type A USB3.0 connector for power supply, the device side uses external power supply.
Application areas
1, industrial video transmission
2, machine vision system
3, high-definition video surveillance system
4, high-speed data acquisition system
5, remote storage
6, digital signage and TV wall
7, industrial printer system
Features:
1, USB3.0 high-speed signal transmission distance extended to 250 meters (single-mode or multi-mode fiber)
2, to meet the USB3.0 signal 5Gbps bandwidth
3, provide power for the other USB3.0 equipment
4, support all self-powered USB3.0 device
5, plug and play, no need driver software
6, USB3.0 A type interface
7, dual fiber or single fiber LC optical interface
8, not compatible with USB1.1 and USB2.0Product
specification:
| Optical | Connector | Duplex/Single LC |
| Wave length | 1310nm/1270/1330nm | |
| Physical | Size (L× W ×H) | 104mm x104mm x28mm |
| Case | Aluminum | |
| Color | Black | |
| N.W. | 0.5Kg | |
| Power | Voltage | 12V DC |
| sender power consumption | <5W | |
| receiver power consumption | <5W | |
| Environment | Working temperature | 0℃-50℃ |
| Storage temperature | -40-85℃ | |
| Humidity | 0-95% (non-condensing) |
Panel diagram:
Operation sequence
1. Connect Host-side (receiver Rx) into the USB3.0 interface on PC or Mac;
2. Connect 12V powr adaptor on the Device-side(transmitter Tx);
3. Connect other USB3.0 devices to the device-side (transmitter Tx).
Note: If the computer does not recognize the equipment, pls do as following:
1. Press the REST button on the device side for 5 seconds to restart the device.
2. Change another USB3.0 interface on the PC/Mac to re-connected.
3. Uninstall the "USB3.0 Hub”in the Device Manager,then reconnect it.
Note:During the course of the use, do not arbitrarily plug the fiber and USB3.0 cable, it may cause the device badly work.
Connection diagram: